help please
Moderator: Moderator
- PEPO
- Grom (25 or less posts to site)
- Posts: 24
- Joined: Sun May 04, 2008 12:11 pm
- Location: TENERIFE ISLAS CANARIAS
help please
Sr.porfavor need help to put my fins the shaper in my area are not made with good waves and grasias
PePo,
Here's a basic Aussie setup for a 6' long, :23" wide board:
Thruster:
Side fins:
18" from tail, 2" in from rail, point to 2" to left and right of nose
Rear fin 9" from tail.
The further back the side fins - more drive
The closer the rear fin forward to the side fins, the looser turn
Hope it helps
Red
Here's a basic Aussie setup for a 6' long, :23" wide board:
Thruster:
Side fins:
18" from tail, 2" in from rail, point to 2" to left and right of nose
Rear fin 9" from tail.
The further back the side fins - more drive
The closer the rear fin forward to the side fins, the looser turn
Hope it helps
Red