Hi all.
I'm heading to Perú to study on exchange from August to December. I really want to surf the waves there, but board fees on the flights I've got are a killer!
I've found a bloke in Lima with a APS3000 shaping machine, an experienced footboard shaper. My thought is to get him to make me a board with a design I've put together on Shape3DX. I don't have a lot of experience shaping, but I have fears of working with footboard shapers because the last one I had made by one was a massive lemon.
I've trawled the design forums and tweaked my own design, please check it out and let me know what just won't work, what will, and what you think.
What are the necessary things to tell the shaper to make sure it rides well? How much should I control the process and how much should I trust his experience?
Fin placement? I had a crack myself, but like I said, I'm inexperienced.
Check out the album with the link
https://imgur.com/gallery/LRnUS
Thanks in advance for your input, hope the waves are firing.
Getting a board shaped in Perú
Moderator: Moderator
Joe is on the money however looking at your design i would say pull both nose and tail out to nearer 17" at the 1' mark and also you will probably need nearer 4.5" rocker in the nose. I've been running tail as low as 1.25" but around 2" for waves with push will be fine. I've been designing my own boards for a few years now and it really is a great way to learn about how things work under your knees and very satisfying when you get a good one dialled in!
-
- Grom (25 or less posts to site)
- Posts: 20
- Joined: Wed Feb 09, 2011 7:09 pm
- Location: Sydney, AUS hailing from Mornington Peninsula, Australia.
Thanks Joe, unfortunately, being a Uni student I'm kinda skint and the boards I currently ride aren't all that trustworthy and are fairly on their last legs. I shopped around for flights and luggage was a major factor, but I read the terms wrong and I'm flying with Iberia, who charge $150 each way for boards! I can probably get my hands on a good second hand stick from my buddy for around $250, but with the carriage fee added, it's looking like costing the price of a new one in Perú anyway.
Thanks so much for the feedback Bryn. I realise I'm biting off a fair bit, but it's a hell of a skill to learn, and there's a certain romance to being able to create your own ride, and s*&^, I've gotta learn somehow. I tweaked the board a little, nose rocker at 4 3/8", and tail 1 7/8. Added a bit of width on the nose and tail, 1' off tail is now 16 5/16" and I decided to go wider on the nose, 16 13/16".
I've still got decisions to make, I'll certainly keep you informed of the outcome.
Thanks so much for the feedback Bryn. I realise I'm biting off a fair bit, but it's a hell of a skill to learn, and there's a certain romance to being able to create your own ride, and s*&^, I've gotta learn somehow. I tweaked the board a little, nose rocker at 4 3/8", and tail 1 7/8. Added a bit of width on the nose and tail, 1' off tail is now 16 5/16" and I decided to go wider on the nose, 16 13/16".
I've still got decisions to make, I'll certainly keep you informed of the outcome.
-
- Ripper (more than 100 posts)
- Posts: 216
- Joined: Sun Nov 30, 2003 9:44 pm
- Location: Oceanside
-
- Legend (Contribution King!)
- Posts: 902
- Joined: Sun May 23, 2004 11:28 pm
- Location: casuarina / kingscliff australia
- Contact:
Ret in touch with Raf Rafinha, i know he's in Brazil but he will help you out if he can.
https://www.facebook.com/rrhandshaper?fref=ts
https://www.facebook.com/rrhandshaper?fref=ts
once you've had black you'll never go back!!!