concave deck kneeboard

What works & what doesn't and in what type of conditions. Got a "secret" only you and your shaper know???? Post it here... we can keep it quiet ;-)

Moderator: Moderator

PES78
Local (More than 25 post)
Local (More than 25 post)
Posts: 83
Joined: Mon Nov 11, 2013 7:46 pm
Location: San Diego

Re: concave deck kneeboard

Post by PES78 »

Have a board in the works being shaped by Tony Caramagna of TC Surfboards. Tony grew up in the Point Loma and Sunset Cliffs area here in San Diego and has made kneeboards before. He is very easy to work with and I feel I was able to tell him what I have trying to do in my shaping. He was very open to trying out something like this. The concave isn't very deep 3/4" of an inch in the center. The thickness out at the rails is 2.5" and the width is 22" wide. Length is 4'10" and he put his channel fish bottom on it. It has about a .25" concave running the length of the board going into a double through the fins, have it set up as a quad.
Attachments
spoondeck.jpg
PES78
Local (More than 25 post)
Local (More than 25 post)
Posts: 83
Joined: Mon Nov 11, 2013 7:46 pm
Location: San Diego

Re: concave deck kneeboard

Post by PES78 »

Here's are couple more pics
Attachments
channelcatbottom.jpg
spoondeck2.jpg
Post Reply