Looking to get into Kneeboarding on East Coast

General discussion area for kneeboard surfing and general surf related topics

Moderator: Moderator

Post Reply
NCmike
Grom (25 or less posts to site)
Grom (25 or less posts to site)
Posts: 6
Joined: Fri Feb 17, 2017 6:38 am

Looking to get into Kneeboarding on East Coast

Post by NCmike »

Hi all,

I am looking at getting into Kneeboard surfing. I started out short boarding around 20 years ago and about 10 years ago had a spinal cord injury that for the most part ended that. Since then I have stuck to either a longboard or a bodyboard. Both are great, but I am thinking a kneeboard would be a ton of fun here in the Outer Banks.

Does anyone know of any east coast shapers or anywhere to look for a used board on the east coast? Everything I find is either West Coast or AU. I am not looking at spending a ton for my first board.

Also, considering shaping or re-shaping a board...thoughts? Maybe get something something like an early 80s thruster sand it down, move the fins up, reinforce the deck, and re glass. IDK that might just be ruining a classic board, lol.

Any other tips or advice?

Thanks!
Landlocked
Local (More than 25 post)
Local (More than 25 post)
Posts: 61
Joined: Wed Apr 16, 2003 12:59 pm
Location: Mooresville NC

Re: Looking to get into Kneeboarding on East Coast

Post by Landlocked »

Hey Mike,

I live near Charlotte and surf the Buxton area a couple of times a year. Scott Busbey at Natural Art in Buxton shaped a board for me copying my Flashpoint. It came out great. He's shaped a couple other guys' kneeboards as well. I'd look him up.

Good luck,
Dean AKA Landlocked
Landlocked
Local (More than 25 post)
Local (More than 25 post)
Posts: 61
Joined: Wed Apr 16, 2003 12:59 pm
Location: Mooresville NC

Re: Looking to get into Kneeboarding on East Coast

Post by Landlocked »

I should clarify...
He didn't just copy, but made a custom for Hatteras, based on my Flashpoint.
NCmike
Grom (25 or less posts to site)
Grom (25 or less posts to site)
Posts: 6
Joined: Fri Feb 17, 2017 6:38 am

Re: Looking to get into Kneeboarding on East Coast

Post by NCmike »

Thanks man! Yeah I'm familiar with his shapes. I'm hoping to not have to drop the $$ on a full custom shape for my first kneeboard though. Really thinking I might to have to Frankenstein something just to get my feet wet. Appreciate the info though!
Landlocked
Local (More than 25 post)
Local (More than 25 post)
Posts: 61
Joined: Wed Apr 16, 2003 12:59 pm
Location: Mooresville NC

Re: Looking to get into Kneeboarding on East Coast

Post by Landlocked »

Where do you live?
You can certainly ride my boards when I'm out there.
NCmike
Grom (25 or less posts to site)
Grom (25 or less posts to site)
Posts: 6
Joined: Fri Feb 17, 2017 6:38 am

Re: Looking to get into Kneeboarding on East Coast

Post by NCmike »

I actually live just over the Wright Memorial in Currituck, so I typically surf Kitty Hawk and Kill Devil Hills. I make it further south when the swell and my free time line up. Definitely feel free to contact me when you're in the Banks I would really appreciate trying one out. I am thinking for now I am going to grab some sort of soft beater board to start with. I've found a few shapes that look promising. Then worst case I have a soft board for my kids when they are old enough, which will be soon!

Take care!
LestarAsh
Posts: 1
Joined: Mon Jun 05, 2017 3:07 am

Re: Looking to get into Kneeboarding on East Coast

Post by LestarAsh »

I am also confused abour that.
Post Reply