Kneeboards are pigs to paddleTom Linn wrote:All I can say is my son Chris keeps telling me "go smaller Dad". Less volume and shorter. I'm resisting taking him shorter than 5'6" and 31 sq liters. Meanwhile, his stand up friend paddles out on a 5'3" , 19 " wide twig. Both of these guys get more waves than me at overhead Jalama a few weeks ago. Neither wears fins.
How long is too long? Anyone reach a limit yet?
Moderator: Moderator
23.5" wideeqKneelo wrote:Hey Red,
How wide is that board? How thick? How many fins?
And how far would you place the fins up?
Pretty much same template as my 6'0" pintails (16" nose and tail)
2 1/4 or so thick. Very fine rails.
Thruster.
20-21" up for rail fins and tail fin about 8" back from that, depending how far the rails are from the stringer.
While I remember, I think the bottom you choose is important. I've had long boards that were over rockered and over veed, built on the assumption that there would be a need to shed power. Never been caught behind sections so much in my life.
I use a pretty standard rocker stretched out to 7'0" (5" or so nose lift and 2 1/2" or so tail lift.)
I like flat bottoms because they behave well when there is a bit of chop or bump. Nothing worse that being bumped off half way through a big bottom turn. For a lightweight like me, concaves, especially deep ones, are not forgiving enough in chop. Bigger guys can probably seat a concave better.
I put subtle vee between the fins to loosen the tail up.
I use a pretty standard rocker stretched out to 7'0" (5" or so nose lift and 2 1/2" or so tail lift.)
I like flat bottoms because they behave well when there is a bit of chop or bump. Nothing worse that being bumped off half way through a big bottom turn. For a lightweight like me, concaves, especially deep ones, are not forgiving enough in chop. Bigger guys can probably seat a concave better.
I put subtle vee between the fins to loosen the tail up.
- Tom Linn
- Legend (Contribution King!)
- Posts: 383
- Joined: Tue Mar 11, 2003 8:32 am
- Location: Laguna Niguel, CA
I'm 58, 6" 170 lbs
Chris is 22, 145 lbs, 5'9
I refuse to use age as an excuse.
Chris is 22, 145 lbs, 5'9
I refuse to use age as an excuse.
"be like water"
http://www.youtube.com/watch?v=7ijCSu87I9k&NR=1
http://www.youtube.com/watch?v=7ijCSu87I9k&NR=1
There should be a header in the design forums.
"Ride what works for you, in your opinion... but don't expect anyone to agree with you."
![Laughing :lol:](./images/smilies/icon_lol.gif)
Look, I think the design forums always get bogged down or devolve into nastiness because everyone's ego gets wrapped up in their surfing.
It's all about having fun... its the JOY OF SURFING... but people seem to make the leap: "I'm having fun... so i rip."
Sorry. We know who rips, so understand you're welcome to your opinions, but your surfing will be compared to their surfing.
I personally have been working with Bruce Hart for years because he shapes for a handful of the best guys in the world and one of his surfers (2x World Champ Kyle Bryant) is my size.
I approach board design with the attitude "relative to those guys, I suck... how do i get my surfing closer to their level?"
That's how i form my opinions. Learn from a master shaper who shapes for some of the best guys in the world.
However... and it's only my opinion... but I gotta say it baffles me when people get so adamant about length and volume NOT working. That it's NOT a factor in the performance aspects of the best surfers in the world.
And i could list endless examples;
- Simon's Videos
- World Title results
- Gavin coming to America in 2007 and 2008 and putting on a clinic
- The videos posted on Legless of Chayne and Albert
- Chris Beresford coming outta the woodwork the last two years and completely dominating the Titles in below average surf on a VERY long VERY thick board that he usually dominates massive scary BLACKS on.
- ect ect ect
So, ride whatever you want.
If you wanna ride a short flat board... GO DO IT. SHAKAS!
Nobody is judging you. Nobody cares.
If you wanna make a couter argument, AWESOME!!!! but give us facts... don't tell us or post frame grabs, get the videos or win the trophies.
Show us it works... and we'll be all ears.
Otherwise, just let those of us who aspire to surf at the highest level possible (even if our ability will always be a great handicap
) discuss ideas in a single forum sub topic.
Cheers
P.S. I got spit out of a full dry shorebreak barrel kneeriding my NINE FOOT 3.5" THICK LONGBOARD THIS MORNING!!!!
Sky's the limit!!!
![Cool 8)](./images/smilies/icon_cool.gif)
"Ride what works for you, in your opinion... but don't expect anyone to agree with you."
![Laughing :lol:](./images/smilies/icon_lol.gif)
Well, then the question becomes "How's he surfing?' and "Can we see an example?'All I can say is my son Chris keeps telling me "go smaller Dad". Less volume and shorter.
Look, I think the design forums always get bogged down or devolve into nastiness because everyone's ego gets wrapped up in their surfing.
It's all about having fun... its the JOY OF SURFING... but people seem to make the leap: "I'm having fun... so i rip."
Sorry. We know who rips, so understand you're welcome to your opinions, but your surfing will be compared to their surfing.
I personally have been working with Bruce Hart for years because he shapes for a handful of the best guys in the world and one of his surfers (2x World Champ Kyle Bryant) is my size.
I approach board design with the attitude "relative to those guys, I suck... how do i get my surfing closer to their level?"
That's how i form my opinions. Learn from a master shaper who shapes for some of the best guys in the world.
However... and it's only my opinion... but I gotta say it baffles me when people get so adamant about length and volume NOT working. That it's NOT a factor in the performance aspects of the best surfers in the world.
And i could list endless examples;
- Simon's Videos
- World Title results
- Gavin coming to America in 2007 and 2008 and putting on a clinic
- The videos posted on Legless of Chayne and Albert
- Chris Beresford coming outta the woodwork the last two years and completely dominating the Titles in below average surf on a VERY long VERY thick board that he usually dominates massive scary BLACKS on.
- ect ect ect
So, ride whatever you want.
If you wanna ride a short flat board... GO DO IT. SHAKAS!
Nobody is judging you. Nobody cares.
If you wanna make a couter argument, AWESOME!!!! but give us facts... don't tell us or post frame grabs, get the videos or win the trophies.
Show us it works... and we'll be all ears.
Otherwise, just let those of us who aspire to surf at the highest level possible (even if our ability will always be a great handicap
![Embarassed :oops:](./images/smilies/icon_redface.gif)
Cheers
P.S. I got spit out of a full dry shorebreak barrel kneeriding my NINE FOOT 3.5" THICK LONGBOARD THIS MORNING!!!!
Sky's the limit!!!
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
-
- Legend (Contribution King!)
- Posts: 388
- Joined: Mon Mar 10, 2003 12:17 pm
- Location: Cosat Mesa-CA
length
Ed and all,
I would like to chime in as well.
In my experience and depending upon where you surf, this can have a big influence on board type and length. Overall volume and thickness & or thinness are huge factors too. Most obvious are a riders height, weight and body type. I'm 5'10", 205pds and most of my all around boards are about that size. Oddly, as of late I got on a thin 6'2", channel bottom Flashpoint and it has been working great in three foot plus surf. On the other hand, it's hard to beat my old 5'9" Blast-Stubb when it's about that size and smaller.
In regard to the surf, obviously the more power and length of a wall on a wave the longer one can go in a board. I notice this while surfing in Hawaii and indo. Fast moving waves over reefs allow for this freedom to move up in length and a bit or more.
Where I surf most often is HB/Newport. It's usually small, sectiony beach break. (Note: we have had some great waves as of late where any board could be properly tested) Short radius turns are needed to really enjoy the waves. Too much length and I can feel bogged down and sluggish.
Consider the video clip on Surfline from a renowned So. Cal shaper, Matt Bilos. He shapes stand-ups for the pros but some of the same concepts are brought up in his discussion on what he will shape for each individual rider.
The best thing about kneeboarders is that most are clever, creative and introspective into their surfing. If a guy is riding a sled but having fun that's his option. If someone aspires to surf at that A+ level and compete there, that is another option too. Whatever the case, I'm enjoying riding new board designs and seeing where I can take it.
MR-
I would like to chime in as well.
In my experience and depending upon where you surf, this can have a big influence on board type and length. Overall volume and thickness & or thinness are huge factors too. Most obvious are a riders height, weight and body type. I'm 5'10", 205pds and most of my all around boards are about that size. Oddly, as of late I got on a thin 6'2", channel bottom Flashpoint and it has been working great in three foot plus surf. On the other hand, it's hard to beat my old 5'9" Blast-Stubb when it's about that size and smaller.
In regard to the surf, obviously the more power and length of a wall on a wave the longer one can go in a board. I notice this while surfing in Hawaii and indo. Fast moving waves over reefs allow for this freedom to move up in length and a bit or more.
Where I surf most often is HB/Newport. It's usually small, sectiony beach break. (Note: we have had some great waves as of late where any board could be properly tested) Short radius turns are needed to really enjoy the waves. Too much length and I can feel bogged down and sluggish.
Consider the video clip on Surfline from a renowned So. Cal shaper, Matt Bilos. He shapes stand-ups for the pros but some of the same concepts are brought up in his discussion on what he will shape for each individual rider.
The best thing about kneeboarders is that most are clever, creative and introspective into their surfing. If a guy is riding a sled but having fun that's his option. If someone aspires to surf at that A+ level and compete there, that is another option too. Whatever the case, I'm enjoying riding new board designs and seeing where I can take it.
MR-
- JohnS
- Ripper (more than 100 posts)
- Posts: 220
- Joined: Tue Oct 11, 2005 7:14 am
- Location: Watsonville, CA
The bottom matters a lot
I was looking at Buddy's website today and was reading about what he says about his Blast big wave boards:
http://www.blastsurfdesigns.com/blast-b ... neeboards/
He talks about how both his gun designs and his shorter big wave fish designs are effective depending upon what you like. The bottom contours of the boards and the rocker also makes such a huge difference, not just the length and volume.
http://www.blastsurfdesigns.com/blast-b ... neeboards/
He talks about how both his gun designs and his shorter big wave fish designs are effective depending upon what you like. The bottom contours of the boards and the rocker also makes such a huge difference, not just the length and volume.
Red , I bought that 6'8 pictured at Sunset, I never did get to ride it as I bought it for an overseas trip that didnt get the swell. I off loaded it to I big guy in the Southwest WA. He is known to charge large outside reef at bears, I guess he is making use of it.
I have had a new board shaped by Dale Ponsford I was looking to go longer at 6'3 (Iam 6'1 100kgs) . After some discussion with him he talked me back to a 6'1 (which I have been riding for the last few years). I am yet to take delivery of the board, Dale is in the camp of not going longer but maintaining volume to suit the rider. He has just shaped a new board for himself at 5'6 he was very encouraged by its results.
Horses for courses I guess.
I have had a new board shaped by Dale Ponsford I was looking to go longer at 6'3 (Iam 6'1 100kgs) . After some discussion with him he talked me back to a 6'1 (which I have been riding for the last few years). I am yet to take delivery of the board, Dale is in the camp of not going longer but maintaining volume to suit the rider. He has just shaped a new board for himself at 5'6 he was very encouraged by its results.
Horses for courses I guess.
Kneelos do it deeper
-
- Legend (Contribution King!)
- Posts: 351
- Joined: Wed Apr 30, 2003 12:19 am
- Location: Cornwall, England.
- Contact:
It would depend what the criteria for too long is. From an aesthetic viewpoint I think a board is too long when it appears to flap in front of the rider.
Going the other way, boards shorter than about 5' 6" can make the rider appear cramped. [also dependent on riders size]
Going the other way, boards shorter than about 5' 6" can make the rider appear cramped. [also dependent on riders size]
"All we are saying, is give knees a chance"
I know Bruce has been experimenting with Asyms for awhile now, but after watching this video I wonder in an asym would make a very functional longer knee board.
I could see an over 7'2" Asym surfing a lot looser.
http://youtu.be/SJpEHK6VjcA
Love this kids whole outlook... Probably speaks to anyone who surfs outside "the box".
(Like all of us).
![😎](//twemoji.maxcdn.com/2/svg/1f60e.svg)
I could see an over 7'2" Asym surfing a lot looser.
http://youtu.be/SJpEHK6VjcA
Love this kids whole outlook... Probably speaks to anyone who surfs outside "the box".
(Like all of us).
-
- Legend (Contribution King!)
- Posts: 902
- Joined: Sun May 23, 2004 11:28 pm
- Location: casuarina / kingscliff australia
- Contact:
Crox, boards appear to flap in front of stand up surfers too but still they persist. This is not directed at you but maybe a few, not all, with negative comments regarding extra length haven't actually surfed a long board and need to find out what those that have, like about them.
Then it's easy, if you don't like them don't surf them.
A bit like penis size, those of us stuck with a short one will never admit that a longer one might be better!!!![Wink :wink:](./images/smilies/icon_wink.gif)
Then it's easy, if you don't like them don't surf them.
A bit like penis size, those of us stuck with a short one will never admit that a longer one might be better!!!
![Wink :wink:](./images/smilies/icon_wink.gif)
once you've had black you'll never go back!!!